Cisco Cisco Packet Data Gateway (PDG) Merkblatt
HNB-PS Network Configuration Mode Commands
associate-sccp-network ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6141
associate-sccp-network
Associates a previously defined Signaling Connection Control Part (SCCP) network identifier with the PS network
instance in order to route the messages towards the SGSN via the IuPS interface.
instance in order to route the messages towards the SGSN via the IuPS interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-PS Network Configuration
configure > ps-network ps_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ps-network-instance_id)#
Syntax
associate-sccp-network sccp_net_id
no associate-sccp-network
no
Removes the associated SCCP network configuration instance from this HNB-PS network instance
configuration.
configuration.
sccp_net_id
Specifies a predefined SCCP network identifier.
Usage
Use this command to associate a predefined SCCP network ID with the IuPS interface in HNB-GW service to
connect with PS network elements; i.e. SGSN.
connect with PS network elements; i.e. SGSN.
Important:
The SCCP network ID must be defined in Global Configuration mode before using it with this
command.
Important:
A single SCCP network ID can not be shared with multiple HNB-PS network instances.
Example
The following command associates SCCP network ID
2
with specific HNB-PS network instance:
associate-sccp-network 2