Cisco Cisco Packet Data Gateway (PDG) Merkblatt
MME Service Configuration Mode Commands
▀ local-cause-code-mapping peer-node-unknown
▄ Cisco ASR 5x00 Command Line Interface Reference
6932
local-cause-code-mapping peer-node-unknown
Configures the reject cause code to send to a UE when peer node resolution is not successful.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
local-cause-code-mapping peer-node-unknown emm-cause-code { eps-service-not-allowed-in-
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
default local-cause-code-mapping peer-node-unknown
default local-cause-code-mapping peer-node-unknown
Returns the cause code mapping to its default value:
unknown-ue-context
peer-node-unknown emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed }
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when the peer node is not known.
eps-service-not-allowed-in-this-plmn
network-failure
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
unknown-ue-context
- Default
Usage
Use this command to configure the cause code returned to a UE when peer node resolution is not successful.
By default, the MME sends the UE the #9 - MS identity cannot be derived by the network cause code
when encountering this condition.
During processing of a TAU Request, the resolution of a peer MME that had allocated the temporary identity
that is signaled to the UE takes several steps in the MME. This resolution can be done based on DNS or based
By default, the MME sends the UE the #9 - MS identity cannot be derived by the network cause code
when encountering this condition.
During processing of a TAU Request, the resolution of a peer MME that had allocated the temporary identity
that is signaled to the UE takes several steps in the MME. This resolution can be done based on DNS or based