Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Network Service Virtual Link Configuration Mode Commands
▀ nsvl-address
▄ Cisco ASR 5x00 Command Line Interface Reference
7066
nsvl-address
This command configures the IP address of the NSVL. end-point.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Network Service Entity - IP Configuration > NSVL Configuration
configure > network-service-entity ip > nsvl instance nsvl_id
Entering the above command sequence results in the following prompt:
[local]host_name(nse-ip-local-nsvl-nsvl_instance)#
Syntax
nsvl-address ip-address ip_address context ctxt_name port port_num
ip-address ip_address
Identifies the address of the NSVL.
ip_address:
Must be specified using the standard IPv4 dotted decimal notation or colon notation for IPv6.
context ctxt_name
Identifies the specific context associated with this NSVL address.
ctxt_name:
Enter up to 79 alphanumeric characters.
port port_num
Specifies the UDP port to associate with the NSVL end-point.
port_num:
Must be an integer from 1 to 65535.
Usage
Use this command to configure the IP address, context name and port number for the NSVL end-point.
Example
nsvl-address ip-address 1.1.1.1 context sgsn2 port 3735