Cisco Cisco Packet Data Gateway (PDG) Merkblatt

Seite von 8487
Service Redundancy Protocol Configuration Mode Commands   
▀  internal-switchover-retry-interval 
 
 
▄  Cisco ASR 5x00 Command Line Interface Reference 
7962 
   
internal-switchover-retry-interval 
Defines the interval between internal switchover retries. 
Product
 
All products supporting ICSR 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration 
configure > context context_name > service-redundancy-protocol
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-srp)# 
Syntax
 
internal-switchover-retry-interval interval 
default internal-switchover-retry-interval 
default
 
Resets the internal switchover retry interval to the default setting of 60 seconds. 
interval
 
Specifies the amount of time (in seconds) between internal switchover retries. 
interval
 must be an integer 
from 10 through 120. Default = 60. 
Usage 
This configures the interval between internal switchover retries. The system only initiates internal 
switchovers if Service Redundancy Protocol (SRP) monitoring is configured. 
Important:
  See the 
monitor authentication-probe
monitor bgp
, or 
monitor diameter
 commands 
for more information on associated SRP monitoring. 
Example
 
The following example sets the internal switchover retry interval to 34 seconds: 
internal-switchover-retry-interval 34