Cisco Cisco Packet Data Gateway (PDG) Merkblatt
SGSN Global Configuration Mode Commands
ranap excess-len ignore ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
8021
ranap excess-len ignore
Configure the SGSN to ignore excess length of received RANAP messages.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
[ default | no ] ranap excess-len ignore
default
Resets the default behavior - a decode error is generated when received RANAP messages are more than an
extra octet in length.
extra octet in length.
no
Disables the configuration to ignore overly long RANAP messages.
Usage
By default, the SGSN issues a decode error when the RANAP messages include extra octets. Use this
command to ignore RANAP messages that have excess octets.
command to ignore RANAP messages that have excess octets.
Example
Use the following command to enable the SGSN to ignore overly long RANAP messages:
ranap excess-len ignore
Use the following command to disable ignoring of RANAP messages that are excessive in length:
no ranap excess-len ignore