Cisco Cisco Packet Data Gateway (PDG)
show pcc-service
▀
▄ Statistics and Counters Reference, StarOS Release 16
4596
Field
Description
Subscriber-Profile Refresh
Interval (sec)
Interval (sec)
Indicates the interval duration in seconds after which Subscriber profile is refreshed
from SSC/SPR in a PCC service.
from SSC/SPR in a PCC service.
Multiple PCEF Per
Subscriber
Subscriber
Indicates status of support for more than one Gx-session for single subscriber
session coming from multiple PCEF in this PCC service instance. By default this
feature is enabled.
session coming from multiple PCEF in this PCC service instance. By default this
feature is enabled.
Setup Timeout
Indicates IPCF setup timeout duration set on a system for setup timer. Possible
range of duration is 1 to 120 in seconds.
By default Setup timeout value is 60 seconds.
Special value of 0 indicates that timer is disabled.
range of duration is 1 to 120 in seconds.
By default Setup timeout value is 60 seconds.
Special value of 0 indicates that timer is disabled.
Idle Timeout
Indicates the idle session timeout duration set for a subscriber session timer.
Possible range of duration is 1 to 4294967295 in seconds.
Special value of 0 indicates that timer is disabled and it is the default behavior.
It also displays the action configured for initiation when idle timer expires. Possible
actions are:
Possible range of duration is 1 to 4294967295 in seconds.
Special value of 0 indicates that timer is disabled and it is the default behavior.
It also displays the action configured for initiation when idle timer expires. Possible
actions are:
None
Reauthorization of session.
Disconnection of session if reauthorization of session fails.
Long-duration Timeout
Indicates the long duration idle session timeout set for a subscriber session timer.
Possible range of duration is 1 to 4294967295 in seconds.
Special value of 0 indicates that timer is disabled and it is the default behavior.
It also displays the action configured for initiation when long duration timeout timer
expires. Possible actions are:
Possible range of duration is 1 to 4294967295 in seconds.
Special value of 0 indicates that timer is disabled and it is the default behavior.
It also displays the action configured for initiation when long duration timeout timer
expires. Possible actions are:
None
Detection of idle session and sending of SNMP traps or CORBA
notification.
notification.
Detection of idle session and then disconnect the session after sending of
SNMP traps or CORBA notification
SNMP traps or CORBA notification
show pcc-service session all
Table 453.
show pcc-service session all
Command Output Descriptions
Field
Description