Cisco Cisco Packet Data Gateway (PDG)

Seite von 5133
 
Statistics and Counters Reference, StarOS Release 16   ▄  
 
    
4959 
show snmp 
 
This chapter describes the output of the 
show snmp
 command. 
show snmp accesses 
Table 538. 
show snmp accesses
 Command Output Descriptions 
Field
 
Description
 
SNMP Usage Statistics: 
Get PDUs 
Received 
The number of SNMP Get request packet data units (PDUs) received by the system from the 
SNMP alarm server. 
GetNext PDUs 
Received 
The number of SNMP GetNext request packet data units (PDUs) received by the system from 
the SNMP alarm server. 
Set PDUs 
Received 
The number of SNMP Set request packet data units (PDUs) received by the system from the 
SNMP alarm server. 
PduTooBig 
Errors 
The number of errors that occurred due to the packet data unit being received is too large. 
NoSuchName 
Errors 
The number of errors that occurred due to the packet data unit being requested not existing in 
the system. For example, this error would be generated if an SNMP "GET" request was 
received for an OID that doesn't exist in the system. 
BadValue Errors 
The number of errors that occurred due to the receipt of a bad value. For example, this error 
would be generated if an SNMP "SET" operation provides an illegal value. 
GenError Errors 
The number errors that occurred that could not be properly classified. For example, this error 
would be generated if the system receives a valid SNMP "GET" PDU requesting a piece of 
data about a card, however, the system experiences an internal error attempting to reach the 
card. 
Agent started 
The date and time when the SNMP agent was started.