Cisco Cisco Packet Data Gateway (PDG)

Seite von 115
Evolved Packet Data Gateway Overview   
▀  Product Description 
 
 
▄  ePDG Administration Guide, StarOS Release 17  
12 
   
Product Description 
The Cisco® ePDG (evolved Packet Data Gateway) enables mobile operators to provide secure access to the 3GPP E-
UTRAN/EPC (Evolved UTRAN/Evolved Packet Core) network from untrusted non-3GPP IP access networks. The 
ePDG functions as a security gateway to provide network security and internet working control via IPSec tunnel 
establishment based on information obtained during 3GPP AAA (Authentication, Authorization, and Accounting). The 
ePDG enables mobile operators to extend wireless service coverage, reduce the load on the macro wireless network, and 
make use of existing backhaul infrastructure to reduce the cost of carrying wireless calls. 
The ePDG has the following key features: 
 
Support for the IPSec/IKEv2-based SWu interface between the ePDG and the WLAN (Wireless LAN) UEs. 
 
Routing of packets between the WLAN UEs and the Cisco P-GW (Packet Data Network Gateway) over the S2b 
interface via GTPv2 or PMIPv6 (Proxy Mobile IP version 6) protocol. 
 
P-GW selection via DNS client functionality to provide PDN (Packet Data Network) connectivity to the WLAN 
UEs. 
 
Support for passing assigned IPv4/IPv6 address configurations from the P-GW to the WLAN UEs. 
 
Support for the Diameter-based SWm interface between the ePDG and the external 3GPP AAA server. 
 
Tunnel authentication and authorization for IPSec/PMIPv6/GTPv2 tunnels using the EAP-AKA (Extensible 
Authentication Protocol - Authentication and Key Agreement) authentication method between the 3GPP AAA 
server and the WLAN UEs. 
 
Encapsulation and decapsulation of packets sent over the IPSec/PMIPv6/GTPv2 tunnels. 
 
Hosts a MAG (Mobile Access Gateway) function, which acts as a proxy mobility agent in the E-UTRAN/EPC 
network and uses PMIPv6 signaling to provide network-based mobility management on behalf of the WLAN 
UEs attached to the network. 
Platform Requirements 
The ePDG service runs on a Cisco ASR 5000/ASR 5500 chassis running the StarOS operating system and QVPC-SI 
(SSI) platform. The chassis can be configured with a variety of components to meet specific network deployment 
requirements. For additional information, see the installation guide for the chassis and/or contact your Cisco account 
representative. 
Licenses 
The ePDG is a licensed Cisco product. Separate session and feature licenses may be required. Contact your Cisco 
account representative for detailed information on specific licensing requirements. For information on installing and 
verifying licenses, see “Managing License Keys” in the System Administration Guide.