Cisco Cisco Packet Data Gateway (PDG) Ratgeber Für Administratoren
Interchassis Session Recovery
Configuring Interchassis Session Recovery (ICSR) ▀
Cisco ASR 5500 System Administration Guide ▄
305
ip pool dynamic 172.18.0.0 255.255.0.0 public 0 srp-activate
ip pool static 172.19.0.0 255.255.240.0 static srp-activate
#exit
context srp
service-redundancy-protocol
#exit
#exit
ip pool static 172.19.0.0 255.255.240.0 static srp-activate
#exit
context srp
service-redundancy-protocol
#exit
#exit
Configuring Subscriber State Management Audit Process
This audit is to ensures that two ICSR peers are in synch and identifies any discrepancies prior to any scheduled or
unscheduled switchover events.
unscheduled switchover events.
Step 1
Enter the SRP Context mode and enter the service-redundancy-protocol command.
Step 2
Enter the audit daily-start-time command. Specify the daily start time as an hour and minute. For example, a start time
of 06 00 indicates that the audit will begin at 6:00 AM.
of 06 00 indicates that the audit will begin at 6:00 AM.
Step 3
Enter the audit periodicity command. Specify the interval in minutes for generating SRP audit statistics as an integer
from 60 through 1440. For example, a periodicity of 90 indicates that SRP audit statistics will be generated every 90
minutes beginning at the specified start time. Default = 60.
from 60 through 1440. For example, a periodicity of 90 indicates that SRP audit statistics will be generated every 90
minutes beginning at the specified start time. Default = 60.
A sample configuration sequence appears below.
config
context srp
service-redundancy-protocol
audit daily-start-time 06 00
audit periodicity 90
end