Cisco Cisco Packet Data Gateway (PDG) Veröffentlichungshinweis
GGSN Changes in Release 15.0
▀ GGSN Enhancements for November 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
206
GGSN Enhancements for November 30, 2013
This section identifies all of the GGSN enhancements included in this release:
Feature Changes - new or modified features or behavior changes. For details, refer to the GGSN Administration Guide
for this release.
for this release.
Command Changes - changes to any of the CLI command syntax. For details, refer to the ASR 5x00 Command Line
Interface Reference for this release.
Interface Reference for this release.
Performance Indicator Changes - new, modified, and deprecated bulk statistics, disconnect reasons, counters and/or
fields in new or modified schema and/or show command output. For details, refer to the ASR 5x00 Statistics and
Counters Reference for this release.
fields in new or modified schema and/or show command output. For details, refer to the ASR 5x00 Statistics and
Counters Reference for this release.
CSCui42540 - P-GW: DHCPv6 default UE prefix should be allocated from AAA
and PD from DHCPv6
Feature Changes
DHCPv6 Default UE Prefix Allocated from AAA and PD from DHCPv6
Previous Behavior: Current implementation supports allocation of both default UE prefix and delegated prefixes from
external DHPCv6 server.
external DHPCv6 server.
New Behavior: Added support for allocating default UE prefix from local/AAA and delegated prefix from external
DHCPv6 server.
DHCPv6 server.
CSCug55201: VZ BCPS QoS change; QCI<->MPLS EXP mapping for HA, UMTS-
GGSN & eHRPD
Feature Changes
Set MPLS Experimental value for outbound traffic
Previous Behavior: Earlier the default behavior was to copy the DSCP value of mobile subscriber traffic to the EXP, if
there was no explicit configuration for DSCP to EXP. It was done using the CLI
there was no explicit configuration for DSCP to EXP. It was done using the CLI
mpls map-dscp-to-exp dscp <n>
exp <m>
.
New Behavior: A new CLi has been introduced which disables the default behavior and the EXP value is set to the
configured <value>, if there is no explicit configuration of DSCP to EXP.
configured <value>, if there is no explicit configuration of DSCP to EXP.
Command Changes
[ no ] mpls exp <value>