Cisco Cisco Aironet 350 Wireless LAN Client Adapter
5
Release Notes for Cisco Aironet Client Utilities (Version 2.22) and Drivers (Version 2.22) for Windows CE
OL-2895-02
Upgrading to a New Client Utility and Driver Release
Step 14
When a dialog box appears asking if you want to install the client adapter using the default application
installation directory, click Yes. The default directory is \Windows\Programs\Cisco on HPC devices or
\Windows\Start Menu\Programs\Cisco on PPC devices.
installation directory, click Yes. The default directory is \Windows\Programs\Cisco on HPC devices or
\Windows\Start Menu\Programs\Cisco on PPC devices.
Note
If you click No on an HPC device, CeAppMgr transfers the *.cab file to the Windows CE
device and executes it. This process takes awhile and shows no evidence of activity.
Eventually a screen appears on the Windows CE device that asks you where the application
files should be installed.
device and executes it. This process takes awhile and shows no evidence of activity.
Eventually a screen appears on the Windows CE device that asks you where the application
files should be installed.
A message and a progress bar appear indicating that the client adapter is being installed. CeAppMgr
copies the processor-specific *.cab file to the Windows CE device. Then the driver and help files are
copied to the \Windows directory, and the client utilities are installed in the \Windows\Programs\Cisco
directory on HPC devices or the \Windows\Start Menu\Programs\Cisco directory on PPC devices.
Shortcuts to ACU and CEM are automatically added to the desktop on HPC devices.
copies the processor-specific *.cab file to the Windows CE device. Then the driver and help files are
copied to the \Windows directory, and the client utilities are installed in the \Windows\Programs\Cisco
directory on HPC devices or the \Windows\Start Menu\Programs\Cisco directory on PPC devices.
Shortcuts to ACU and CEM are automatically added to the desktop on HPC devices.
Step 15
When the installation process is complete on the laptop or PC, a message appears asking you to check
the screen of the Windows CE device to see if any additional steps are required to complete the
installation. Click OK to terminate the installation process on the laptop or PC.
the screen of the Windows CE device to see if any additional steps are required to complete the
installation. Click OK to terminate the installation process on the laptop or PC.
Step 16
Complete any required steps on the Windows CE device.
Step 17
Disconnect the Windows CE device.
Step 18
Insert the client adapter (with the Cisco logo facing up) into the PC card slot of the Windows CE device.
The Windows CE device should configure the client adapter, and the green LED on the adapter should
blink. If this does not happen, remove the client adapter, reset the Windows CE device, and reinsert the
client adapter.
blink. If this does not happen, remove the client adapter, reset the Windows CE device, and reinsert the
client adapter.
Step 19
The Cisco Wireless LAN Adapter Settings dialog box appears. (If the dialog box does not appear, select
Start, Settings, Control Panel, Network, the Adapters tab, the Cisco Aironet wireless LAN adapter,
and Properties on HPC devices or Start, Settings, the Connections tab, Network, and the Cisco
Aironet wireless LAN adapter on PPC devices.)
Start, Settings, Control Panel, Network, the Adapters tab, the Cisco Aironet wireless LAN adapter,
and Properties on HPC devices or Start, Settings, the Connections tab, Network, and the Cisco
Aironet wireless LAN adapter on PPC devices.)
Perform one of the following:
•
If your device is connected to a DHCP server, select Obtain an IP address via DHCP or Use
server-assigned IP address and click OK.
server-assigned IP address and click OK.
•
If your device is not connected to a DHCP server, select Specify an IP address or Use specific IP
address and follow the steps below:
address and follow the steps below:
a.
Enter the IP address, subnet mask, and default gateway address you want to assign to your
device. They can be obtained from your system administrator.
device. They can be obtained from your system administrator.
b.
Select the Name Servers tab and enter the primary and secondary DNS and WINS you want to
assign to your device. They can be obtained from your system administrator.
assign to your device. They can be obtained from your system administrator.
c.
Click OK.
Step 20
Double-click the Cisco ACU icon or select Start > Programs > Cisco > Aironet Client Utility to open
ACU.
ACU.
Step 21
Select SSID under Property. Enter your RF network’s case-sensitive SSID in the Value box.
Step 22
Select Client Name under Property. Enter your Windows CE device’s unique client name in the Value
box.
box.