Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Installationsanleitung
Cisco WAP371 Wireless Access Point
6
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
N
OTE
If you need help resolving a problem, visit the Cisco Support
Community at
.
Label
Activity
Description
Power
Off
The WAP371 is out of power.
Solid (Green)
The Cisco WAP371 is powered on, booting, or
in normal operation with PoE.
in normal operation with PoE.
Solid (Amber)
The Cisco WAP371 is powered on, booting, or
in normal operation with External Power
Adapter
in normal operation with External Power
Adapter
Flashing (Green
or Amber)
or Amber)
The Cisco WAP371 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
or is acquiring an IPv4 or IPv6 address.
Solid (Red)
The Cisco WAP371 fails to boot with both
firmware images.
WLAN
Off
Wireless is disabled, for both 2.4 GHz and 5
GHz.
GHz.
Solid
Wireless is enabled.
Green
Concurrent mode enabled.
Amber
5 GHz is in use.
Blue
2.4 GHz is in use.
Flashing
The WAP371 is transmitting or receiving data.
LAN
Off
No Ethernet link.
Solid Green
GE Ethernet link is active.
Solid Amber
FE Ethernet link is active.
Flashing
The WAP 371 is transmitting or receiving data.
5