Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Wartungshandbuch
Wireless
Networks
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
81
5
Click Enable pre-authentication if you want WPA2 wireless clients to send pre-
authentication packets. The pre-authentication information is relayed from the WAP
device that the client is currently using to the target WAP device. Enabling this feature
can help speed up authentication for roaming clients who connect to multiple APs.
authentication packets. The pre-authentication information is relayed from the WAP
device that the client is currently using to the target WAP device. Enabling this feature
can help speed up authentication for roaming clients who connect to multiple APs.
This option does not apply if you selected WPA for WPA Versions because the original
WPA does not support this feature.
WPA does not support this feature.
Client stations configured to use WPA with RADIUS must have one of these addresses
and keys:
and keys:
-
A valid TKIP RADIUS IP address and RADIUS Key
-
A valid CCMP (AES) IP address and RADIUS Key
•
Use Global RADIUS Server Settings—By default, each VAP uses the global RADIUS
settings that you define for the WAP device (see
settings that you define for the WAP device (see
). However, you can
configure each VAP to use a different set of RADIUS servers.
To use the global RADIUS server settings, make sure the check box is selected.
To use a separate RADIUS server for the VAP, uncheck the box and enter the RADIUS
server IP address and key in these fields:
server IP address and key in these fields:
•
Server IP Address Type—The IP version that the RADIUS server uses.
You can toggle between the address types to configure IPv4 and IPv6 global RADIUS
address settings, but the WAP device contacts only the RADIUS server or servers for
the address type that you select in this field.
address settings, but the WAP device contacts only the RADIUS server or servers for
the address type that you select in this field.
•
Server IP Address 1 or Server IPv6 Address 1—The address for the primary RADIUS
server for this VAP.
server for this VAP.
If IPv4 is selected as the Server IP Address Type, enter the IP address of the RADIUS
server that all VAPs use by default, for example, 192.168.10.23. If IPv6 is selected,
enter the IPv6 address of the primary global RADIUS server, for example,
2001:DB8:1234::abcd.
server that all VAPs use by default, for example, 192.168.10.23. If IPv6 is selected,
enter the IPv6 address of the primary global RADIUS server, for example,
2001:DB8:1234::abcd.
•
Server IP Address 2 to 4 or Server IPv6 Address 2 to 4—Up to three IPv4 and/or IPv6
addresses to use as the backup RADIUS servers for this VAP.
addresses to use as the backup RADIUS servers for this VAP.
If authentication fails with the primary server, each configured backup server is tried in
sequence.
sequence.
•
Key 1—The shared secret key for the global RADIUS server. You can use up to 63
standard alphanumeric and special characters. The key is case sensitive, and you must
configure the same key on the WAP device and on your RADIUS server. The text you
enter is shown as asterisks to prevent others from seeing the RADIUS key as you type.
standard alphanumeric and special characters. The key is case sensitive, and you must
configure the same key on the WAP device and on your RADIUS server. The text you
enter is shown as asterisks to prevent others from seeing the RADIUS key as you type.