Cisco Cisco Prime Network Registrar 8.1 Installationsanleitung
Sample Implementation
Cisco Prime Network Registrar IPAM 8.1.2
• 23
Define a CNR DHCP 8.0/CNR DHCP 8.1 Server
The next step is to define a DHCP server that will be used to
serve DHCP addresses to our clients.
Prerequisite
Note: Note: IPAM Remote agent has to be installed in the
Prerequisite
Note: Note: IPAM Remote agent has to be installed in the
servers where DHCP and DNS are running and added in
Tools -> Agents page of IPAM WebUI to facilitate the user
to select the remote agent while defining a CPNR
DHCP/CPNR DNS server. Procedures involved to install the
IPAM Remote Agent can be found in IPAM 8.1.2 Installation
Guide.
To define a DHCP server within the system, perform the
To define a DHCP server within the system, perform the
following steps:
1. Click on the Management tab.
2. Click on the Servers/Services sub menu item under the
1. Click on the Management tab.
2. Click on the Servers/Services sub menu item under the
DHCP section of the menu.
3. Click on the
Add Network Service link to add a new
DHCP server. The Add DHCP server screen will appear.
4. Enter the name of “
dhcp-hq.sampleco.com” which is the
fully qualified domain name for this DHCP Server.
5. Enter the IP Address of “
10.0.0.2” which is on the
CoreNet segment.
6. Select “
CNR DHCP 8.1” for the Product Name of this
DHCP server.
7. Choose the DHCP Version
as “DHCPv4/v6” and the
value of the Agent as the name of the
IPAM Remote
Agent (installed in the server where DHCP is running) and
leave the defaults the way they are for
“Default Scope
Utilization” and “Include during global
synchronization”.
8. Click on the
“Management” tab
9. Select the option
“Collect via CNR SDK”.
10. Provide
Username, Password, Confirm Password
(username and password of CPNR) and
Port (default is
1234).