Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Installationsanleitung
6
Cisco ONS 15454 RAN Service Module Installation Instructions
OL-12941-02
Installing the Cisco ONS 15454 RAN Service Module
Cisco ONS 15454 RAN Service Module Port-Level Indicators
You can find the status of the Cisco ONS 15454 RAN Service Module ports using the LCD screen on
the ONS 15454 SDH fan tray assembly. Use the LCD to view the status of any port or card slot; the
screen displays the number and severity of alarms for a given port or slot. Refer the Cisco ONS 15454
SDH Troubleshooting Guide for a complete description of the alarm messages.
the ONS 15454 SDH fan tray assembly. Use the LCD to view the status of any port or card slot; the
screen displays the number and severity of alarms for a given port or slot. Refer the Cisco ONS 15454
SDH Troubleshooting Guide for a complete description of the alarm messages.
Specifications
The Cisco ONS 15454 RAN Service Module has the following specifications:
•
Environmental
–
Operating temperature:
C-Temp: 32 to 104°F (0 to 40°C)
–
Operating humidity: 5 to 95%, non-condensing
–
Power Consumption: 82 W
•
Dimensions
–
Height: 12.65 in. (32.13 cm)
–
Width: 0.716 in. (1.82 cm)
–
Depth: 9.0 in. (22.86 cm)
–
Card weight: 3.1 lb (1.4 kg)
•
Compliance
–
For compliance information, see the Cisco Regulatory Compliance and Safety Information for
the Cisco ONS 15454 RAN Service Module.
the Cisco ONS 15454 RAN Service Module.
Installing the Cisco ONS 15454 RAN Service Module
Use this section if you are installing the Cisco ONS 15454 RAN Service Module for the first time. After
you become familiar with the Cisco ONS 15454 RAN Service Module installation, use this section as a
reference.
you become familiar with the Cisco ONS 15454 RAN Service Module installation, use this section as a
reference.
Table 1
Cisco ONS 15454 RAN Service Module LEDs
LED
Color
State
Description
Fail (labeled
FAIL)
FAIL)
Red
On
The red FAIL LED indicates that the card’s processor is not
ready. Replace the card if the red FAIL LED persists.
ready. Replace the card if the red FAIL LED persists.
Active/Standby
(labeled
ACT/STBY)
(labeled
ACT/STBY)
Green
On
When the ACT/STBY LED is green, the RAN Service Module
is operational and ready to carry traffic.
is operational and ready to carry traffic.
Amber
Off
When the ACT/STBY LED is amber, the RAN Service Module
is operational but in standby (protect) mode while the image is
being downloaded from TCC-I.
is operational but in standby (protect) mode while the image is
being downloaded from TCC-I.