Cisco Cisco Prime Network 4.0 Betriebsanweisung
Page 23 of 39
Support for Command Scripts in 4.0
Prime Network 4.0 provides new support for command scripts as shown in the following table.
New Command Script Support in 4.0
New Command Support in 4.0
Supported on:
Basic Operations
Basic Device Settings
Add Host Name
Remove Host name
Add DNS server
Remove DNS server
Add NTP server
Remove NTP server
Add Radius server
Remove Radius server
Add Tacacs server
Add Tacacs+ server
Remove Tacacs server
Remove Tacacs+ server
Syslog Host Logging
Add SNMP Configuration
Remove SNMP Configuration
Update SNMP Configuration
Add Traps
Enable Traps
Remove Traps
Cisco NX OS and Cisco IOS XE
Cisco Carrier Packet Transport (CPT 200 and CPT 600)
System
Cisco Carrier Packet Transport (CPT 50) System*
Note: SNMP Configuration not supported on Cisco
Universal Broadband Router 10000 (uBR10k) and Cisco
RF Gateway 10 devices that run on IOS and IOS XE
Device Ports
Add port description
Remove port description
Update port description
Change port status
Assign to port Vlan
Deassign port to Vlan
Device Configuration Files and Memory
Write Memory
Running Config
Running Config from File
Startup Config
Copy Files
From FTP
From TFTP
To FTP
To TFTP
View users (Telnet Sessions) on device
Users (Telnet session)
Addendum: Additional VNE Driver Support for
Cisco Prime Network 4.0