Cisco Cisco Prime Performance Manager 1.5 Entwickleranleitung
Cisco Prime Performance Manager1.5 REST API Guide
FQDN=Node=em1941kbf.cisco.com,ifDescr=FastEthernet0/
0
FQDN=Node=10.74.125.210,CPUSlot=0,CPUNum=0,processor
Index=1
FQDN=Node=NAM-ppm-nam01,Group=MY_GROUP
FQDN=Group=CableModem
FQDN=IPSLAOwner=Rubens
FQDN=DatastoreName=Local+Datastore+sjo-smf-esxi-8
Refer to your Prime Performance Manager server or network to determine
your own FQDN values.
0
FQDN=Node=10.74.125.210,CPUSlot=0,CPUNum=0,processor
Index=1
FQDN=Node=NAM-ppm-nam01,Group=MY_GROUP
FQDN=Group=CableModem
FQDN=IPSLAOwner=Rubens
FQDN=DatastoreName=Local+Datastore+sjo-smf-esxi-8
Refer to your Prime Performance Manager server or network to determine
your own FQDN values.
Additional Notes
Only supported for “GET /{reportType}/{category}../{reportName}” requests.
If an FQDN or sgmid is not provided, the REST API defaults to a top network level report. A network level
report consists of information for the top samples in that report metric.
report consists of information for the top samples in that report metric.
Refer to the Prime Performance Manager documentation for more information about network level reports.
Not supported by views.
5.7.2 sgmid
Table 8 – sgmid Parameter
Parameter
Notes
sgmid
A positive integer number that uniquely identifies a node in the Prime
Performance Manager server
Format:
Positive integer number greater than 0 (e.g. 1002, 13001, ..).
-1 is also accepted, and it is optional. See note (3) below.
Examples of valid formatted sgmid:
sgmid=1002
sgmid=13001
Refer to your Prime Performance Manager server or network to determine
your own sgmid values
Performance Manager server
Format:
Positive integer number greater than 0 (e.g. 1002, 13001, ..).
-1 is also accepted, and it is optional. See note (3) below.
Examples of valid formatted sgmid:
sgmid=1002
sgmid=13001
Refer to your Prime Performance Manager server or network to determine
your own sgmid values
Additional Notes
Only supported in the “GET /{reportType}/{category}../{reportName}” requests.
If an FQDN or sgmid is not provided, the REST API defaults to a top network level report. A network
level report consists of information for the top samples in that report metric. Refer to the Prime
Performance Manager documentation for more information about network-level reports.
level report consists of information for the top samples in that report metric. Refer to the Prime
Performance Manager documentation for more information about network-level reports.
For consistency with the Prime Performance Manager web based application a sgmid equal to -1 means a
network level report. However, this sgmid parameter value is not required as a network level report is
already assumed when FQDN and sgmid are not given.
network level report. However, this sgmid parameter value is not required as a network level report is
already assumed when FQDN and sgmid are not given.
Not supported by views.
5.7.3 startDate
Table 9 – startDate Parameter
Parameter
Notes
startDate
The start date for the reporting data.
Format:
yyyy-MM-ddTHH:mmZ
Format:
yyyy-MM-ddTHH:mmZ