Cisco Cisco 1 GHz GainStar Node Installationsanleitung
Chapter 2 Installation and Configuration
30
OL-31947-02
To Attach the Service Cable Connector
Complete the following steps to attach the connector to the housing.
1 Install the RF PG11 to the 5/8” adapter and torque from 12.0 Nm to 16.0 Nm.
1 Install the RF PG11 to the 5/8” adapter and torque from 12.0 Nm to 16.0 Nm.
2 Feed the jacketed fibers one at a time through the fiber entry port.
3 Screwing the main nut into the fiber entry port and torque from 6.8 Nm to 9.0
3 Screwing the main nut into the fiber entry port and torque from 6.8 Nm to 9.0
Nm.
4 Screw the rotational nut back onto the main nut and torque from 9.0 Nm to 12.0
Nm.
5 Use heat shrink to seal as required.
6 Proceed to Attaching the Fiber Connectors.
6 Proceed to Attaching the Fiber Connectors.