Cisco PowerKEY CableCARD Module 803 Betriebsanweisung
About This Guide
78-4011765-01 Rev C
v
About This Guide
Introduction
The PowerKEY CableCARD module and the PowerKEY Multi-Stream CableCARD
module (M-Card) are Cisco’s unique hardware modules developed to provide
subscribers with controlled conditional access to secure, digital content. Whether
paired with a digital cable-ready TV, a digital set-top, or any other host device, the
PowerKEY CableCARD or M-Card module must receive an initial configuration in
order to function properly.
Purpose
This guide provides instructions for setting up and configuring the PowerKEY
CableCARD and PowerKEY Multi-Stream CableCARD (M-Card) modules and the
CableCARD Server on the Digital Network Control System (DNCS). This guide also
provides procedures for configuring the emergency alert system (EAS) to properly
function with the PowerKEY CableCARD and M-Card modules. In addition, this
guide also includes a brief overview on how to verify that the PowerKEY
CableCARD and M-Card modules are setup and configured correctly.
Scope
The contents of this guide apply to sites that are running DNCS System Releases
(SR) 2.5/3.5 or 4.0 and one or more of the following PowerKEY CableCARD or M-
Card modules:
PKM600 PowerKEY CableCARD Module
PKM800 PowerKEY Multi-Stream CableCARD Module (M-Card)
PKM802 PowerKEY Multi-Stream CableCARD Module (M-Card)
Audience
This publication is written for Digital Broadband Delivery System (DBDS) operators
and engineers, DNCS operators and engineers, Cisco field engineers, and Cisco
Services engineers who are setting up (configuring) the PowerKEY CableCARD
module.