Cisco Cisco D9804 Multiple Transport Receiver Installationsanleitung
Chapter 3 Installation
20
78-4042990-01 Rev B
To Connect AC Power
To connect AC power to the D9804 MTR do the following:
1 Connect the power cords (supplied with the D9804 MTR) between the rear panel
1 Connect the power cords (supplied with the D9804 MTR) between the rear panel
power receptacles and a 100 to 120/200 to 240 V AC power outlet.
2 Make sure that the power cable is connected to protective ground. See
Grounding (on page 19) for more information.
The D9804 MTR is equipped with two power supplies. Power supplies #1 and #2
are located in the rear of the chassis as shown in the photograph below. Note
their position in the event of a power supply alarm, possibly resulting in
replacement of a power supply. Alarm messages appear in the Alarms and
Warnings History.
The D9804 MTR is equipped with two power supplies. Power supplies #1 and #2
are located in the rear of the chassis as shown in the photograph below. Note
their position in the event of a power supply alarm, possibly resulting in
replacement of a power supply. Alarm messages appear in the Alarms and
Warnings History.