Cisco Cisco Content Delivery Engine 250 Installationsanleitung
Americas Headquarters:
© 2012 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
78-20819-01
Installing the Cisco VQE Application on the
CDE250
CDE250
Revised: May 2012 78-20819-01
Preinstalled Software Notice—Chassis Lite—CDE250-XR-2WPL-K9
This Chassis Lite server, CDE250-XR-2WPL-K9, supports the CDE250-2M0 and CDE250-2V0 models
and is preloaded with the Cisco Internet Streamer CDS software application.
and is preloaded with the Cisco Internet Streamer CDS software application.
Note
The Chassis Lite server, PID CDE250-HV-23WPL-K9, supports the CDE250-2S6 model and is
preloaded with the Cisco TV CDS software application.
preloaded with the Cisco TV CDS software application.
For CDE250-2V0 applications requiring the VQE Server software application, use the included
DVD-ROM, CDS Visual Quality Experience Application Installation DVDROM ISO (part number
80-10381-XX), to automatically install Release 3.6.1 of the Cisco VQE Server software application. Full
installation instructions are included in this document.
DVD-ROM, CDS Visual Quality Experience Application Installation DVDROM ISO (part number
80-10381-XX), to automatically install Release 3.6.1 of the Cisco VQE Server software application. Full
installation instructions are included in this document.
Note
The estimated installation time is 30 minutes.
The following items are required to install the VQE Server software application:
•
CDE250-XR-2WPL-K9 RMA Chassis Lite
•
External USB DVD-ROM drive (PID CDE3-ACC-DVD or equivalent)
•
1x 200 GB solid state drive (SSD) (saved from original CDE250-2V0 server)
•
DVD-ROM CDS Visual Quality Experience Application Installation DVDROM ISO (part number
80-10381-XX)
80-10381-XX)
•
One or two power supplies (saved from original server)
•
Terminal server or terminal server emulator (settings: 9600 baud, 8 bits, no parity)
•
Console connection cable