Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installationsanleitung
4027192 Rev B
5
Transponder Configuration Procedure
Transponder Configuration Procedure
Introduction
The transponder must be configured before it is added to your network and
activated by CheetahNet.
The following equipment is required:
The following equipment is required:
The Test2Way for GainMaker (GMTest2Way) software application
A local interface cable, part number 1004044
A Windows-based desktop or laptop computer with a DB-9 serial port connector
Configuring the Transponder
Complete the following steps to configure the transponder.
1 Attach the local interface cable from the computer's serial port to the
1 Attach the local interface cable from the computer's serial port to the
transponder's local control port.
Note: Make sure the plugs are fully inserted into the ports.
2 Launch the GMTest2Way application.
Results: The main screen displays.