Cisco Headend System Release 2.5 Installationsanleitung
6-14
Basic System Functionality Tests
78-738190-01 Rev B
Modify DHCT Configuration,
Continued
7.
Turn on power to the DHCT and send an addressable configuration update to
the DHCT to change the power-on channel.
8.
Wait 1 minute and then turn off, and then on, the power to the DHCT.
Result: The DHCT tunes to the channel just specified as the new power-on
Result: The DHCT tunes to the channel just specified as the new power-on
channel.
Notes:
Notes:
9.
At the installation engineer’s discretion, repeat the steps in this section up to
four times.
Result: The results should be similar to the results previously stated.
Notes:
Result: The results should be similar to the results previously stated.
Notes: