Cisco Headend System Release 2.5
Re-Enable the Disk Mirroring Function
4000916 Rev C
75
Monitoring the Disk-Mirroring Process
The syncwait utility allows engineers to monitor the progress of the disk mirroring
process. Follow these instructions to run the syncwait utility.
process. Follow these instructions to run the syncwait utility.
Note: To examine the complete documentation on the syncwait utility, refer to the
Monitor Submirror Synchronization with the syncwait Utility chapter in the
CoolTools Utilities User's Guide.
1 Open another xterm window on the DNCS.
2 Type syncwait.ksh and then press Enter. The system displays a message stating
Monitor Submirror Synchronization with the syncwait Utility chapter in the
CoolTools Utilities User's Guide.
1 Open another xterm window on the DNCS.
2 Type syncwait.ksh and then press Enter. The system displays a message stating
the percentage of the mirror-synchronization process that is complete.
Example:
The following example shows two mirrored disk sets: d503 and d506. The
submirrors associated with d503 are 2 percent synchronized. The submirrors
associated with d506 are 43 percent synchronized.
Note: The syncwait utility updates the display every 20 seconds.
Example:
The following example shows two mirrored disk sets: d503 and d506. The
submirrors associated with d503 are 2 percent synchronized. The submirrors
associated with d506 are 43 percent synchronized.
Note: The syncwait utility updates the display every 20 seconds.
3 When the system displays the following message, the disk mirroring process is
complete; type n (for no) and then press Enter. The syncwait utility exits.
No Resync in progress …
Continue monitoring status?
No Resync in progress …
Continue monitoring status?