Cisco Cisco Digital Service Access Node (DSAN) 8211 Fehlerbehebungsanleitung
Confirming Video Output
4032301 Rev A
47
You can verify that each tuner is locked onto its target RF input frequency on CLI
diag page 1.0, as shown in the following example.
diag page 1.0, as shown in the following example.
The status of each tuner will report as either Locked (in green), Unlocked (in red), or
N/A (in yellow) if the associated tuner is not configured.
N/A (in yellow) if the associated tuner is not configured.
Similarly, tuner status is displayed on diag page 5.0 as either L (in green) for locked
or U (in red) for unlocked, as shown below.
or U (in red) for unlocked, as shown below.