Cisco Headend System Release 3.2 Installationsanleitung
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Display CableCARD/Host Configuration
4020695 Rev C
155
Display CableCARD/Host Configuration
The information in this section describes how to use the tellDhct utility to display
configuration data related to the CableCARD/host relationship. When used with the
-C option, the tellDhct utility displays the following data:
configuration data related to the CableCARD/host relationship. When used with the
-C option, the tellDhct utility displays the following data:
MACaddress - MAC address of the CableCARD module
SM_serial_num - serial number of the secure micro chip
Host_id - ID number of the host to which the CableCARD module is bound
active_file_date - the date until which data for the CableCARD/host binding
stays in the BFS file
stays in the BFS file
rev - revoked
Note: This field can have two values: a dash or REV. A dash indicates that the
subscriber can view copy-protected content; REV indicates that the subscriber
cannot view copy-protected content.
Note: This field can have two values: a dash or REV. A dash indicates that the
subscriber can view copy-protected content; REV indicates that the subscriber
cannot view copy-protected content.
Displaying CableCARD/Host Configuration
Follow these instructions to run the tellDhct utility to display configuration data
related to the CableCARD/host relationship.
1 If necessary, open an xterm window on the DNCS.
2 Choose one of the following options:
related to the CableCARD/host relationship.
1 If necessary, open an xterm window on the DNCS.
2 Choose one of the following options:
To display data for a single CableCARD module, go to step 3.
To display data for a list of CableCARD modules, go to step 4.