Cisco Headend System Release 2.7 Installationsanleitung

 

78-745262-01Rev C

 

33 

 

Before installing the Alarm Manager software, be sure that your system meets the 

following hardware and software requirements. These requirements were addressed 

when you filled out the diagram and checklist in Chapter 1. However, our engineers 

request that you reconfirm your system's eligibility by reviewing and verifying the 

software and hardware requirements listed in this section. 

 

Your DNCS must meet the following requirements to support the NMI software: 

 

SR 2.2 or SR 3.2 Service Pack 2 or later, software installed 

 

Port 5161 available for use to receive Simple Network Management Protocol 

(SNMP) requests 

 

Port 5162 available for use to receive SNMP traps 

 

Can ping Alarm Manager server(s) by hostname and IP address 

 

Before installing the Alarm Manager server software, be sure that your system meets 

the following minimum hardware and operating system (OS) requirements: 

 

Systems supporting fewer than 100,000 deployed DHCTs 

256 MB memory 

400 MHz CPU 

One 18-GB (or larger) disk drive 

2 Ethernet adapters 

Solaris 8 OS (end user installation preferred, must have X-Windows 

capability) 

Port 3050 available for database use by the Alarm Manager server 

Port 5161 available for use to receive SNMP requests 

Port 5162 available for use to receive SNMP traps 

Port 5901 available for communications with the DNCS 
Note:  The Alarm Manager server must have network connectivity to the 

Alarm Manager client PCs that connect to the server, as well as to the DNCS.