Cisco Headend System Release 2.7 Installationsanleitung
Set the Clock on the TED (Optional)
4036631 Rev B
97
Set the Clock on the TED (Optional)
Complete these steps to set the clock on the TED.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 Type date and then press Enter. The system date and time appears.
4 Write down the system date and time in the space provided.
4 Write down the system date and time in the space provided.
System Date: _________________________
System Time: _________________________
System Time: _________________________
5 Type rsh -l root dncsted and press Enter.
Note: The "l" is a lowercase L.
6 Type in the root password and press Enter. You are logged on to the TED as root
user.
7 Type date and press Enter. The TED date and time appears.
8 Compare the time results from step 4 with step 7. Do the time results match the
8 Compare the time results from step 4 with step 7. Do the time results match the
time zone where the equipment is physically located?
If yes, go to step 11.
If no, go to step 9.
9 At the prompt, type date [mmddhhmm] and press Enter.
Example: date 07132316
Notes:
Notes:
The format for the date command is:
–
–
mm-month
–
dd-day
–
hh-hours in 24 hour format
–
mm-minutes
The command can be modified to include the year, the seconds, or both the
year and seconds.
year and seconds.
Examples:
The date 073123162001 includes the year.
The date 07132316.30 includes the seconds.
The date 071323162001.30 includes the year and seconds.