Cisco Headend System Release 2.7 Installationsanleitung
4040195 Rev B
11
Install the Solaris Patch Set
Install the Solaris Patch Set
After you have completed the pre-installation checks and verified your system's NIC
type, follow these instructions to install the Solaris Patch Set 4.2.1.10.
1 Insert the Solaris patch CD into the DNCS CD/DVD drive.
2 Type df -h and press Enter to verify that the CD is mounted. You should see a
type, follow these instructions to install the Solaris Patch Set 4.2.1.10.
1 Insert the Solaris patch CD into the DNCS CD/DVD drive.
2 Type df -h and press Enter to verify that the CD is mounted. You should see a
response similar to /cdrom/cdrom0 in the far left column of the output.
3 Did the CD auto-mount?
If yes, go to the next step.
If no, follow these instructions to manually mount the CD.
a Type svcadm -v disable -s volfs and press Enter to disable the
Volume Management File System.
b Type svcadm -v enable -rs volfs and press Enter to enable the
Volume Management File System.
c Did the CD auto-mount?
–
If yes, go to step 4.
–
If no, continue with the next sub-step.
d Type rmformat -l and press Enter to view the CD drive path.
Example:
Looking for devices...
1. Logical Node: /dev/rdsk/c0t0d0s2
Physical Node: /pci@1f,700000/pci@0/pci@1/pci@0/ide@1f/sd@0,0
Connected Device: TSSTcorp CD/DVDW TS-T632A SR03
Device Type: CD Reader/Writer
e Type mount -F hsfs /dev/dsk/c0t0d0s0/cdrom and press Enter.
Note: Note that we use dsk in the above command.
f Type df -h | grep cdrom and press Enter to verify that the CD is
mounted.
Example:
/dev/dsk/c0t0d0s0 585M 585M 0K 100% /cdrom
4 Close the File Manager window.