Cisco Cisco Workload Automation 6.3 Betriebsanweisung
13
Configuring the UCS Manager Adapter
Configuring the HTTPS Protocol
8.
Select the USCM users that this scheduling user can use for USCM authentication from USCM jobs.
9.
Click the Agents tab.
10.
Select the check boxes for the USCM connections that this scheduling user can access when scheduling jobs.
11.
Click OK to save the user definition.
Configuring the HTTPS Protocol
UCS Manager can be configured to use SSL via the HTTPS protocol. If your environment is configured to use HTTP, you
can skip this section.
can skip this section.
For complete instructions on configuring UCS Manager servers to use the HTTP or HTTPS protocol, refer to the UCSM
documentation that ships with the product.
documentation that ships with the product.
Obtain Security Certificates
From a Windows desktop, you can obtain a security certificates for each target UCSM server using the Microsoft Internet
Explorer Certificate Cache.
Explorer Certificate Cache.
Note:
Although other procedures are available for obtaining the required certificates, the procedure below can be
performed from your Windows desktop.
Note:
You need to carry out the following instructions only if your server certificate is generated in-house (that is,
self-signed) or if your server certificate is signed by a Certification Authority that is not trusted by the version of Java you
are using. Alternatively, if your adapter connection fails by reporting the error “unable to find valid certification path to
requested target” you need to carry out the following instructions.
are using. Alternatively, if your adapter connection fails by reporting the error “unable to find valid certification path to
requested target” you need to carry out the following instructions.
To obtain target UCSM server security certificates
1.
Open the Internet Explorer browser and navigate to the following dispatch URL (replacing servername and port as it
applies to your environment).
applies to your environment).
https://<adminHost:adminPort>/admin/servlet/webservices
where adminHost is where the USC Manager is installed and adminPort is the port the USC Manager is listening on.
A
Security Alert
message displays.
2.
Click
View Certificate
to open the
Certificate
dialog.
3.
Click
Install Certificate
.
4.
On the
Certificate Import Wizard
Welcome
panel, click
Next
.
5.
On the
Certificate Store
panel, use the default option
Automatically select the certificate store based on
the type of certificate
and click
Next
.
6.
On the
Completing Certificate Import Wizard
panel, click
Finish
.
A
Security Warning
message displays informing you that you are about to install a certificate from a certification
authority.
7.
Click
Yes
to continue with the certificate installation.
A message stating The import was successful displays.
8.
Click
OK
to close the message and return to the
Certificate
dialog.