Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Installationsanleitung
Chapter 7 Customer Information
428
78-4021139-01 Rev D
The following are usage examples:
usrmstats /opt/usrm/EventLog/28Aug2009_000000.txt
InitRequests = 0
InitConfirms = 0
SelectRequests = 51080
SelectConfirms = 50298 (Success=50289 Failures=9)
NoBandwidth = 9
CreateSessions = 44494 (Success=44494 Failures=0 Timeouts=0)
DeleteSessions = 44491 (Success=44491 Failures=0 Timeouts=0)
QamResourceEnd = 5
172.16.4.15 = 1
172.16.4.82 = 2
172.16.4.77 = 1
172.16.4.78 = 1
QamStarup = 5
172.16.4.15 = 1
172.16.4.82 = 2
172.16.4.77 = 1
172.16.4.78 = 1
To specify a start and end time:
usrmstats -s 10:00 -e 12:00 /opt/usrm/EventLog/28Aug2009_000000.txt
usrmcctail
Use this command to display channel change and QAM operations, combining all
Use this command to display channel change and QAM operations, combining all
operations related to a single transaction together. You can use this tool to display
real time channel change operations or to evaluate an Event log file.
When evaluating a log file, start and end times can be specified to narrow the results
When evaluating a log file, start and end times can be specified to narrow the results
of the evaluation. When using this tool, you must provide the full path to the log file
to be evaluated.
The following are usage examples:
The following are usage examples:
usrmcctail
++++++++++ 001ac3a0c19c/0x50338 ++++++++++
SelConf 2009/08/28 13:33:16.833 RC=OK MPN=1044 Freq=735000000
++++++++++ 001ac32783aa/0x1dacd ++++++++++
SelReq 2009/08/28 13:33:18.900 STB=10.7.0.114 Tuner=0 SGID=1192 SID=2016
RmBwReq 2009/08/28 13:33:18.902 BW=15000000 GDA=232.0.0.17
RmCreateSession 2009/08/28 13:33:18.903 SesId=001d09fa643c/4893841
RID=172.16.4.82 chan0=3 EdgeIn=172.18.81.1 GDA=232.0.0.17
RID=172.16.4.82 chan0=3 EdgeIn=172.18.81.1 GDA=232.0.0.17
SelConf 2009/08/28 13:33:18.904 RC=OK MPN=1035 Freq=747000000
RmCmdSuccess 2009/08/28 13:33:18.907 Cmd=CreateSession RID=172.16.4.82
++++++++++ 001ac320ceed/0xb8a4 ++++++++++
SelReq 2009/08/28 13:33:19.668 STB=10.7.0.43 Tuner=0 SGID=1192 SID=1106
RmBwReq 2009/08/28 13:33:19.674 BW=3750000 GDA=232.1.1.11
RmCreateSession 2009/08/28 13:33:19.677 SesId=001d09fa643c/4893842
RID=172.16.4.82 chan0=3 EdgeIn=172.18.82.1 GDA=232.1.1.11
RID=172.16.4.82 chan0=3 EdgeIn=172.18.82.1 GDA=232.1.1.11
SelConf 2009/08/28 13:33:19.677 RC=OK MPN=1056 Freq=747000000
RmCmdSuccess 2009/08/28 13:33:19.681 Cmd=CreateSession RID=172.16.4.82
usrmcctail /opt/usrm/EventLog/28Aug2009_000000.txt
usrmcctail -s 10:00 -e 11:00 /opt/usrm/EventLog/28Aug2009_000000.txt
socketout
The socketout program is located in the linux-tools directory in /opt/usrm on a
The socketout program is located in the linux-tools directory in /opt/usrm on a
USRM server. This tool can act as a receiver of UDP messages. For example, if you
configure USRM to send log messages to another system and then run socketout on
the other system, socketout receives those messages and displays them to the screen.
The output can also be piped to a file.