Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Installationsanleitung
USRM Web Interface - Application Components
78-4021139-01 Rev D
229
Parameter
Description
DisplayMode
Sets the SdvSm display mode, as follows:
Normal - only populated entries in tables are displayed.
Config - selects Configuration mode.
Normal - only populated entries in tables are displayed.
Config - selects Configuration mode.
STBDeleteThreshold
The time threshold for deleting a set-top box entry. When
there is no communication with the STB for greater than
this period, the entry can be deleted if needed to
maintain a new entry.
Default: 60 days
Default: 60 days
CcpInitRequired
Most SDV switched channel change protocols require
that the client register with the server before requesting a
switched service, but some protocols do not. This
configuration item selects if an initialization is required
before requesting services, as follows:
Yes - indicates that an initialization request is required.
No - indicates that an initialization request is not
Yes - indicates that an initialization request is required.
No - indicates that an initialization request is not
mandatory.
RecaptureMode
Recapture refers to the process of reclaiming bandwidth
from users that are no longer present. When the software
detects no activity from a client for a long period of time,
the software may reclaim the bandwidth used by the idle
clients. This configuration parameter selects how the
recapture will operate, as follows:
Immediate - indicates that the software should reclaim
Immediate - indicates that the software should reclaim
the bandwidth as soon as eligible.
OnDemand - indicates that the software should only
OnDemand - indicates that the software should only
reclaim the bandwidth when needed to satisfy user
demands.
NonResponderThreshold
A non-responder report is available on the web interface.
This configuration parameter selects the minimum no-
response time for inclusion in the non-responder report.
MpegProgramLow
The USRM assigns MPEG program numbers to programs
when they are activated. This configured parameter sets
the first program number of the range assigned to
services managed by the SdvSm application. The server
uses the least-recently-used (LRU) algorithm to assign
program numbers. When a program number is released
from use, the time of release is marked for the program.
When the server assigns a new program number, the
release times are used to select the oldest program
number.