Cisco DNCS System Release 2.7 3.7 4.2 Designanleitung

Seite von 110
4000358 Rev B 
Setting Up a Home Network 
6-9 
Connect the DOCSIS-Capable DHCT to a PC Through a Router,
 Continued 
 
10.  Confirm that the PC can connect to the Internet by opening a browser and 
browsing a Web site such as 
. Can the subscriber browse the 
Web site? 
• 
If yes, the connections are made properly, and the subscriber has 
completed this procedure. Ask the subscriber to repeat steps 6 through 10 
for any additional PCs he or she wants to connect to a DOCSIS-capable 
DHCT through a router. 
• 
If no, go to step 11. 
11.  Open a command prompt (MS DOS prompt) and type ipconfig  /release and 
press Enter
Result:  The network interface releases any previously held addresses. 
12.  At the command prompt, type ipconfig  /renew and press Enter
Result:  The network interface attempts to get a new IP address, and then 
displays the network interface configuration.  
13.  Does the Ethernet port have an IP address that is not 0.0.0.0 and does not start 
with 169.254? 
• 
If yes, the connection is working. Go to step 14 
• 
If no, call the cable service provider for assistance. 
14.  Confirm that the PC can connect to the Internet by opening a browser and 
browsing a Web site such as 
. Can the subscriber browse the 
Web site? 
• 
If yes, the connections are made properly, and the subscriber has 
completed this procedure. 
• 
If no, check the configuration for the network access translation (NAT) 
and internal DHCP server or router, if the customer has NAT/DHCP 
functionality on the router; or call the cable service provider for assistance.