Cisco DNCS System Release 2.7 3.7 4.2 Installationsanleitung
3-8
Configure an NTP Server
78-4011510-01 Rev C
Verify and Monitor NTP Server Configuration and Connection
Introduction
After you bounce the S99xntpd process, run the Doctor Report to verify that the
system has a configuration and connection to the NTP server. This section provides
the procedure for verifying and monitoring the NTP server configuration and
connection.
The Doctor Report provides the following information:
•
The Doctor Report provides the following information:
•
Time setting of the DNCS
•
Time differences between the DNCS and the Application Server (if any)
•
Time synchronization source from which the DNCS and the Application Server
get their times (NTP server or GPS)
Verifying and Monitoring the NTP Server Configuration and Connection
Complete these steps to verify and monitor the NTP server configuration and
connection.
Important: Wait approximately 15 minutes after bouncing the S99xntpd process to
Important: Wait approximately 15 minutes after bouncing the S99xntpd process to
perform this procedure to give the server time to synchronize with the DNCS.
1.
Click the DNCS tab from the DNCS Administrative Console window; then,
click the Utilities tab.
2.
Click xterm.
Result: The xterm window opens.
Result: The xterm window opens.
3.
In the xterm window on the DNCS, type cd /export/home/dncs/doctor and
press Enter.
Result: The /export/home/dncs/doctor directory is now the working
Result: The /export/home/dncs/doctor directory is now the working
directory.
Notes:
•
Notes:
•
You may want to expand the xterm window to be able to see more of the
report without having to scroll as much.
•
If you cannot run the Doctor program, or if you do not have it, contact
Cisco Services.