Cisco DNCS System Release 2.7 3.7 4.2 Installationsanleitung
Appendix A
System Verification Procedures
78
OL-31613-01
Verify the Channel Map After the Upgrade
Verify that the channel map associated with various types of DHCTs in the headend
is accurate for each specific hub. If you notice that the channel map is not accurate,
complete the following steps.
is accurate for each specific hub. If you notice that the channel map is not accurate,
complete the following steps.
Delete the sam File Server
1 Have you confirmed that there are inaccuracies in the channel map of various
1 Have you confirmed that there are inaccuracies in the channel map of various
DHCTs?
If yes, go to step 2.
If no, check the channel map associated with various types of DHCTs in the
headend for each specific hub.
Note: Complete the procedures in this section only if the channel maps are
not accurate.
headend for each specific hub.
Note: Complete the procedures in this section only if the channel maps are
not accurate.
2 From the EC WUI, click Application Interface Modules > BFS Client. The Site
DNCS Broadcast File Server List window opens.
3 Highlight the sam file server.
4 Click File > Delete. A confirmation message appears.
5 Click Yes and press Enter. The system deletes the sam file server.
4 Click File > Delete. A confirmation message appears.
5 Click Yes and press Enter. The system deletes the sam file server.
Bounce the saManager Process
1 From the EC WUI Process Status window, click the radio button next to the
1 From the EC WUI Process Status window, click the radio button next to the
saManager process.
2 Click Stop. In a few minutes, the indicator for the saManager process changes
from green to red.
Note: Do not go to the next step until the indicator has changed from green to
red.
Note: Do not go to the next step until the indicator has changed from green to
red.
3 Click the radio button next to the saManager process again.
4 Click Start. In a few minutes, the indicator for the saManager process changes
4 Click Start. In a few minutes, the indicator for the saManager process changes
from red to green.
Save the Channel Map WebUIs
1 Wait the length of time of the SAM Configuration Update Timer.
1 Wait the length of time of the SAM Configuration Update Timer.
Note: You can find this value on the SAM Configuration window.
2 Examine again the channel maps for the DHCTs.
If the channel maps are accurate, you are finished with this procedure.
If the channel maps are still inaccurate, go to step 3.
3 Open the Channel Map user interface for each applicable channel map, and click
Save.