Cisco Cisco 1 GHz GainMaker Amplifier Datenbogen
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Table 6.
Physical Specifications
Environmental
Operating temperature range
-40 - 140°F (-40 - 60°C)
Mechanical
Housing dimensions (L x H x D)
17.3 in. x 7.2 in. x 7.8 in. (439.4 mm x 182.9 mm x 198.1 mm)
Weight
● Housing with power supply
● Module
● Module
12 lb, 5 oz (5.6 kg)
5 lb, 5 oz (2.4 kg)
Ordering Information
The Cisco GainMaker GaN HGD System Amplifier is available in a wide variety of configurations. The desired
configuration is “built” by accessing the Cisco Commerce Workspace tool at
configuration is “built” by accessing the Cisco Commerce Workspace tool at
. The user specifies the new Assemble to Order (ATO) Product ID for the
GainMaker System Amplifier High Gain Dual System Amplifier “GMSA-HGD” and the tool steps through the
available options. Services may also be selected during this process. Once all the desired options are selected, the
configuration and price are displayed
. When the “Done” radio button is clicked, the configuration can be exported
and saved for future use or immediate ordering. Table 7 and Table 8 contain ordering information for required and
optional accessories. Please consult with your Account Representative, Customer Service Representative, or
System Engineer to determine the best configuration for your particular application.
Table 7.
Required Accessories
Required Accessories
Part Number
Plug-in Pads (attenuators): Available in 0.5 dB steps from 0 to 20.5 dB
● 1 required for forward input
● 1 required for AGC, if applicable
● 1 required for AGC, if applicable
*
● 4 required for reverse (3 input, 1 output)
*
To determine AGC pad value, subtract 34 dB from the design value main port RF output
level at the AGC pilot frequency.
589693 (0 dB) sequentially thru 589734
(20.5 dB)
(20.5 dB)
Plug-in Forward Cable Equalizer: Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
● 1 required for forward input
4007228 (0 dB)
sequentially thru 4007248 (30 dB)
Plug-in Reverse Cable Equalizer: Available in 1 dB steps from 0 to 12 dB at 42 MHz
● 1 required for reverse output, unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and 589628 (1 dB)
sequentially thru 589639 (12 dB)
Plug-in Signal Director for Auxiliary output: 1 required, chose from the following:
● Jumper
● Two-Way Splitter
● DC-8 Directional Coupler
● DC-12 Directional Coupler
● Two-Way Splitter
● DC-8 Directional Coupler
● DC-12 Directional Coupler
4008208
4008364
4008365
4008366