Cisco Cisco StadiumVision Mobile Reporter Wartungshandbuch
© 2011 Cisco Systems, Inc. All rights reserved.
Page 10 of 14
Micros Suites Services
The Micros Services Monitor checks if the Micros server is up and running
and can be reached over the network from the SV Director. If it can and
there are Stores that have been defined for a Micros vendor installation, the
services monitor checks that it can do a basic call to the Micros server for
that store. This check confirms the Store exists in Micros and is configured
and responding.
and can be reached over the network from the SV Director. If it can and
there are Stores that have been defined for a Micros vendor installation, the
services monitor checks that it can do a basic call to the Micros server for
that store. This check confirms the Store exists in Micros and is configured
and responding.
If there is an error in any of the above, the status will be red/down instead of
green/up.
green/up.
Additionally, if there are Stores configured, the Micros service monitor
performs another action that does not influence the overall up/down status.
For each store, a call is made that will „wake up‟ the Micros internal
processes. This is to make sure that when an order comes through, all the
Micros processes will be ready for a quick response. If this were not done,
the first real transaction to come through could time out or fail. This process
runs briefly once every 30 minutes.
performs another action that does not influence the overall up/down status.
For each store, a call is made that will „wake up‟ the Micros internal
processes. This is to make sure that when an order comes through, all the
Micros processes will be ready for a quick response. If this were not done,
the first real transaction to come through could time out or fail. This process
runs briefly once every 30 minutes.
Director Server
The Director Server monitoring service gathers information from the
underlying SV Director operating system. It looks at three parameters: CPU
underlying SV Director operating system. It looks at three parameters: CPU