Cisco Cisco StadiumVision Director Wartungshandbuch
© 2012 Cisco Systems, Inc. All rights reserved.
Page 28 of 103
DMP and TV Location
Introducing Locations
There are three object types that are used in Cisco StadiumVision Director to track
and create relationships between DMPs and their physical location. These object
types are as follows:
and create relationships between DMPs and their physical location. These object
types are as follows:
• DMP – This object type describes a DMP with the following information.
o
Name – This is the name that describes the DMP. Typically its name is
derived from the MAC address (e.g., Unassigned-00-0f-44-01-a5-ec) or the
Location Name.
Location Name.
o
Description – Optional field for additional description information
o
IP Address – DMP IP Address
o
MAC Address – DMP MAC Address
• Location – This object type defines the physical location where the DMP is
located with the following information.
o
Name – This is the name used to identify the location and is derived from a
naming convention that an operator can easily identify where the DMP is
physically located.
physically located.
o
Description – Optional field for additional description information
o
Location ID – Optional field for additional location information. This field is
typically not used.
o
Display Spec – Drop-down menu for choosing the TV Type at the location
• DMP+Location – This object type is the summation of the DMP and Location
objects when they are linked.
These object types can be created manually using the Cisco StadiumVision Director
web interface or uploaded in bulk using the Bulk Administration Tool (BAT).
web interface or uploaded in bulk using the Bulk Administration Tool (BAT).
Location Naming Convention