Cisco Cisco StadiumVision Director Wartungshandbuch
© 2011 Cisco Systems, Inc. All rights reserved.
Page 27 of 40
Table 3.
Initial Config Command Parameters
Parameter
Description
init.FTP_password
Sets the FTP password
init.ROOT_password
Sets the root password
init.WEB_password
Sets the web password
init.SYSMNG_password
Sets the SYSMNG password
Staging the Flash Template
Send the Stage Flash Template command to stage/copy the Flash Template on the
selected device(s).
selected device(s).
You must stage the Flash template when new Cisco DMPs are installed or when the
Flash template application is modified. The Flash template application is the Flash
.swf file that runs on all Cisco StadiumVision DMPs (this is different from the screen
templates used on a Cisco DMP and also distinct from any .swf files the user has
created as content).
Flash template application is modified. The Flash template application is the Flash
.swf file that runs on all Cisco StadiumVision DMPs (this is different from the screen
templates used on a Cisco DMP and also distinct from any .swf files the user has
created as content).
Sending RS-232 Commands for TV Control
Use the TV Commands in the Device Configuration
drawer to send RS-232 commands that control the TV
On/Off state, change the TV input and TV display banner,
enable/disable closed captioning, set the TV volume and
video channel, and set the SWF that displays when the
TV first turns on.
drawer to send RS-232 commands that control the TV
On/Off state, change the TV input and TV display banner,
enable/disable closed captioning, set the TV volume and
video channel, and set the SWF that displays when the
TV first turns on.
StadiumVision Director sends TV control commands to
the StadiumVision Flash application on the DMP via RS-
232 codes. The TV must be suitably equipped and
connected to the DMP. These codes are centrally
administered in the SV Director Control Panel.
the StadiumVision Flash application on the DMP via RS-
232 codes. The TV must be suitably equipped and
connected to the DMP. These codes are centrally
administered in the SV Director Control Panel.
If you are an internal Cisco StadiumVision administrator, information on the tested
and untested RS-232 commands is posted on the internal Sharepoint site at:
and untested RS-232 commands is posted on the internal Sharepoint site at:
Refer to the StadiumVision Video Endpoint Delivery DIG for details on how to set RS-
232 commands.
232 commands.
Turning a TV On/Off
Send the TV On or TV Off TV command to turn a TV controlled by the selected DMP
on or off.
on or off.