Cisco Cisco StadiumVision Mobile Wartungshandbuch
© 2011 Cisco Systems, Inc. All rights reserved.
Page 26 of 83
Chapter 3 Implementation
This chapter provides information about how to implement local TV control in a Cisco
StadiumVision venue.
StadiumVision venue.
Prerequisites
The following should be done prior to implementing local TV control and are not
discussed in this guide.
discussed in this guide.
Requirement
For More Information, See
Cisco StadiumVision headend
installed/configured
installed/configured
Video feeds mapped to IP Multicast streams
from headend
from headend
DMPs and attached TVs installed
DMPs configured in Cisco StadiumVision
Director
Director
IP Multicast streams mapped to local
channels in Cisco StadiumVision Director
channels in Cisco StadiumVision Director
Channel guide defined in Cisco
StadiumVision Director
StadiumVision Director
Templates, event scripts, and additional
content defined in Cisco StadiumVision
Director
content defined in Cisco StadiumVision
Director
Cisco Unified Communications Manager
installed/configured (if IP Phone used)
installed/configured (if IP Phone used)
Implementation Caveats
Keep the following in mind as you design and implement local TV control.
Any designated area requiring local TV control (restaurant, club, bar, back office,
locker
room, press box) must be configured as a “Luxury Suite” within Cisco
StadiumVision Director.
When an IP phone is used for as the local control device for a designated area,
it is configured using the “IP Phone” tab of the “Luxury Suite” page.
When a 3
rd
party device is used for local control, it is configured using the “Local
Control” tab of the “Luxury Suite” page.
SVD recognizes an IP phone by its IP address. Hence the phones IP address
must remain the same. This means the IP address need to be statically