Cisco Cisco StadiumVision Mobile Reporter Wartungshandbuch
© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Internal Information. Page 22 of 23
Figure 16. Defining a Delay Channel
Defining a Non-Event Channel
If you have assigned DMPs to the nonevent_zone in SV Director, you can configure
the channel you want the TVs controlled in the non-event_zone to play when no
event script is running. If no channel is configured, the DMPs will display the default
channel during the non-event state.
the channel you want the TVs controlled in the non-event_zone to play when no
event script is running. If no channel is configured, the DMPs will display the default
channel during the non-event state.
1. Open the event script.
2. Click the green plus sign (+) above the Ad Hoc states panel.
3. Enable the Manual transition button (the default setting).
4. Click Edit in the Ad Hoc State box.