Cisco Compact Mini Amplifier A93188 Installationsanleitung
Mounting instruction Compact Mini Amplifier 93188 (100-240V AC)
6
1
AC connection
100-240 V AC
100-240 V AC
Reverse path (plug-in)
Active: Type 93140-xxx
Passive: Type 74069
Automatic termination of
reverse, if no module is
mounted.
Active: Type 93140-xxx
Passive: Type 74069
Automatic termination of
reverse, if no module is
mounted.
Fuses (turnable) 5AT
Choose AC-pass
2 pcs in 93188 Coax
Line powered
Choose AC-pass
2 pcs in 93188 Coax
Line powered
Terminal for earthing
Test point -20 dB
directional-coupled
directional-coupled
DC-voltage indicator
Attenuator, variable
0 - 18 dB
0 - 18 dB
Diplex reverse filter
Type 75110-3047
Type 75110-4054
Type 75110-5070
Type 75110-5575
Type 75110-6587
If no reverse wanted;
Use 0 dB link type 74089
Type 75110-3047
Type 75110-4054
Type 75110-5070
Type 75110-5575
Type 75110-6587
If no reverse wanted;
Use 0 dB link type 74089
F-connector
In-/outputs
Option PG11 at input
In-/outputs
Option PG11 at input
Equalizer (plug-in)
Type 74100-8xx,862MHz
If no tilt is wanted;
Use 0 dB link type 74069
Type 74100-8xx,862MHz
If no tilt is wanted;
Use 0 dB link type 74069
Fuse
2.0 AT at local supply
2.0 AT at local supply
Mounting fittings
Distance between holes
168 mm. / 6
Distance between holes
168 mm. / 6
5
/
8
in.
Equalizer, variable
0 - 18 dB
0 - 18 dB
93188-536
93188-136
93188-236
93188-236
Reverse
36dB
862MHz
Diplex
1
Diplex
F
F
E
q
q
Att
0-18dB
0-18dB
Eq
-
20dB
Figure 1: Amplifier overview
Application
The Compact Mini Amplifiers has one active output. The plug-in filters in the reverse
path allow flexible choice of frequency range for both passive and active reverse path
transmission.
path allow flexible choice of frequency range for both passive and active reverse path
transmission.
Mounting
The amplifier should be mounted vertically with the cable input underneath, to secure
best possible operating temperature conditions. Use a 4 mm Allen key for screw in lid
and fasten with 5 Nm.
The cable on a F-connector is tightened with max. 3 Nm and the pin length of the PG 11
cable connector is shown in fig. 1.
best possible operating temperature conditions. Use a 4 mm Allen key for screw in lid
and fasten with 5 Nm.
The cable on a F-connector is tightened with max. 3 Nm and the pin length of the PG 11
cable connector is shown in fig. 1.
Plug-in units
Plug-in Diplex Reverse Filters
Use 2 pcs. of type 75110 with the desired filter frequency. If the reverse path is not used
at all, mount 2 pcs. link type 74089.
Use 2 pcs. of type 75110 with the desired filter frequency. If the reverse path is not used
at all, mount 2 pcs. link type 74089.
Equalizer
It is also possible to use pre-equalizer type 74100 between the amplifier stages. If the
pre-equalization is not needed mount 0 dB link type 74069.
It is also possible to use pre-equalizer type 74100 between the amplifier stages. If the
pre-equalization is not needed mount 0 dB link type 74069.