Cisco Cisco Explorer Set-top Software Version 2.1 Betriebsanweisung
Chapter 2 Network Status Diagnostic Screens for all Explorer DHCTs
36
749244 Rev G
Screen Fields and Values
This section describes the fields and possible values that can appear in this
This section describes the fields and possible values that can appear in this
diagnostic screen.
Current FDC
Field
Name
Description
Possible Values
Freq
The frequency (Freq) of the tuned
QPSK receiver
QPSK receiver
[Network-dependent]
Range: 70 MHz–130 MHz
Range: 70 MHz–130 MHz
DAVIC
The status of the current Digital
Audio Visual Council (DAVIC)
connection
Audio Visual Council (DAVIC)
connection
Booting—DHCT is attempting to
initiate a DAVIC connection
initiate a DAVIC connection
Calib Power—DHCT is calibrating
the power level of the QPSK
transmitter for optimal performance
the power level of the QPSK
transmitter for optimal performance
Completion—DHCT received sign
on request; waiting for DAVIC
initialization to complete or for
DAVIC ranging/ power calibration
message
on request; waiting for DAVIC
initialization to complete or for
DAVIC ranging/ power calibration
message
Conn Confirm—DHCT received a
DAVIC connect message for a
connection set up by an active
session, sent a DAVIC connect
response message, and is waiting
for a DAVIC connect confirm
message to acknowledge the
session connection is ready to use
DAVIC connect message for a
connection set up by an active
session, sent a DAVIC connect
response message, and is waiting
for a DAVIC connect confirm
message to acknowledge the
session connection is ready to use
Connected—connection exists;
typically two-way
typically two-way
Data Lock Lost—DHCT stopped
receiving valid data; must re-
establish a DAVIC connection
when it finds valid data
receiving valid data; must re-
establish a DAVIC connection
when it finds valid data
Dflt Cfg—DHCT is waiting for
DAVIC default configuration
message
DAVIC default configuration
message
DNCS Conn—DHCT adjusted its
power, received initialization
completion message, and is
waiting for DNCS to send a DAVIC
connect message to establish
default DNCS connection
power, received initialization
completion message, and is
waiting for DNCS to send a DAVIC
connect message to establish
default DNCS connection