Cisco Cisco Videoscape Voyager Vantage 3.3 Betriebsanweisung
181
Services Diagnostics
WiFi Summary Screen
SSID
Service Set Identifier. The current
SSID is in use by the connection.
SSID is in use by the connection.
[String]
Default value=”- -“
MacAddress
MAC address of the WAP.
[String]
Default value=”- -“
IPAddress
IP address of the WAP.
[String]
Default value=”- -“
TransmitPower
Indicates the current transmit power
level as a percentage of full power.
level as a percentage of full power.
[Percentage (%)]
Default value=”- -“
UpTime
Linux up time since the WAP was last
restarted.
restarted.
[Day hh::mm:ss]
Default value=”- -“
NtpSyncStatus
Status of the CPE (VEN501) that is
synchronized to the selected host
NTP server. The “host” is the set-top
that the VEN501 is attached to via
Ethernet.
synchronized to the selected host
NTP server. The “host” is the set-top
that the VEN501 is attached to via
Ethernet.
Note:
A status of Error could be
triggered by one of the following
conditions:
conditions:
Host not found
No IP address for that record
Non-recoverable name server
error
error
Try again later
Unknown error
Error
Synchronized
Error_FailedToSynchronize
Default value=“--”
CurrentChannel
The current radio channel used by the
connection.
connection.
[Number]
Default value=“--”
LastDfsChEntered
Date and time last entered in DFS
channel since last reboot.
channel since last reboot.
[Weekday name] [Month] [Day of
Month] [hh:mm:ss] [Year]
Month] [hh:mm:ss] [Year]
Default value=“--”
LastDfsChExited
Date and time last exited the DFS
channel since last reboot.
channel since last reboot.
[Weekday name] [Month] [Day of
Month] [hh:mm:ss] [Year]
Month] [hh:mm:ss] [Year]
Default value=“--”
Firmware Upgrade Info
Table 18
Wi-Fi Summary Screen: Page 1 (continued)
Field Name
Description
Possible Values