Cisco Cisco Prime Network Services Controller 3.2 Installationsanleitung
Action
Screen
Provide the following information:
• VM IP address
• IP subnet mask
• Gateway IP address
• DNS hostname
• DNS domain
• DNS server IP address
• NTP server IP address
• Operation mode: standalone or orchestrator
• Admin password
• Shared secret password
Note
• You cannot change the Operation mode after
you deploy Prime Network Services Controller.
• Address any errors presented in red text below
the selection box. You can enter placeholder
information as long as your entry meets the field
requirements.
information as long as your entry meets the field
requirements.
• You can safely ignore the Prime Network
Services Controller Restore fields.
Properties
Review the deployment settings.
Any discrepancies can cause VM booting issues.
Carefully review the IP address, subnet mask, and
gateway information.
Carefully review the IP address, subnet mask, and
gateway information.
Caution
Ready to Complete
Step 6
Click Finish.
A progress indicator shows the task progress until Prime Network Services Controller is deployed.
A progress indicator shows the task progress until Prime Network Services Controller is deployed.
Step 7
After Prime Network Services Controller is successfully deployed, click Close.
Step 8
For ESXi 5.1 hosts, enable hardware-assisted virtualization by doing the following:
1
In the vSphere Client, right-click the Prime Network Services Controller VM, and choose Upgrade Virtual Hardware.
2
In the vSphere Web Client, right-click the Prime Network Services Controller VM, and choose Configuration >
Upgrade Virtual Hardware.
Upgrade Virtual Hardware.
VMware upgrades the virtual hardware to the latest supported version.
Step 9
Power on the Prime Network Services Controller VM.
15