Cisco Cisco OptoStar II Driver Amplifier Installationsanleitung

Seite von 77
Operating using ICIM LCD, Continued 
Sub-menu 2 -- Gain Control Mode 
The illustration below shows sub-menu 2 of the OptoStar II 1550 nm DWDM 
forward direct modulation transmitter module – Gain Control Mode. 
 
The gain control mode is set to AGC by default. The cursor stays on the selection 
field of AGC/MGC by default. Press ▲▼ button to select the gain control mode. 
• 
To select AGC mode (with a gain range of 11 to 19 dBmV) 
1.  Press ▲▼ button to keep the  symbol on AGC option;   
2.  Press ► button to move the cursor to ”Set”; 
3.  Press SET button to save the configuration. 
• 
To select MGC mode (with a gain range of -5 to +5 dB, with 0.5 dB step) 
1.  Press ▲▼ button to keep the  symbol on MGC option;   
2.  Press ► button to move the cursor in the value field; 
3.  Press SET button to start the configuration; 
4.  Press ▲▼ buttons to change the value, and press SET button to confirm; 
5.  Press ► button to move the cursor to ”Set”; 
6.  Press SET button to save the configuration. 
 
 
Continued on next page 
 
 
OL-29668-02 
   Operation 
3-11