Cisco Prisma IP E100 Series Packet Ring Access Platform Datenbogen

 

2

 
 

 

•  Uncompressed transport of one HD and up to three SD-SDI video signals, or up to six SD-SDI video signals 

•  Optional DPCM compression for transport of two HD-SDI signals, or one HD-SDI and up to four SD-SDI 

signals for bandwidth efficiency 

•  Loop-back port for local monitoring of video services 

•  Dual SFP (small form-factor pluggable) optical interface slots uses industry standard SFP optical modules 

•  Compatible with Prisma IP M-Series, C-Series, and Micro-Node chassis 

•  One-way configurable for efficient “drop and continue” architectures 

•  2.488 Gbps optical data rate (OC-48c / STM-16c) 

•  Command Line Interface (CLI) via local serial port and/or remote Telnet session 

•  Remote manageable via SNMP 
 
 

 

Electrical Specifications 
HD-SDI Signal Protocol 

1.485 or 1.485/1.001 Gbps Serial Interface per ANSI/SMPTE-292M  

SD-SDI/SDTI Signal Protocol 

•  270 Mbps Serial Interface per ITU-R BT.656-4 and ANSI/SMPTE-

259M-1997 Level C support only (259M-C) 

•  270 Mbps Serial Digital Video interface supporting 525L/60 and 

625L/50 Component Video per SMPTE-125M and ITU-R (CCIR) 
BT.601 / 656-2   

•  270 Mbps SDTI Interface per SMPTE-305M-98  

DVB ASI Signal Protocol 

• ITU ASI-C 

•  270 Mbps Link Rate 

•  213.726 Mbps Input Data Rate (max) 

• Transparent Transport 

Port Configuration for HD-SDI Input I/O Card 

•  Seven (7) total available dual-rate SDI ports  

•  Two (2) ports configured for HD-SDI, SD-SDI, SDTI or ASI video input 

•  Four (4) ports configured for SD-SDI, SDTI or ASI video input 

•  One (1) port software configurable for video monitor port 

Port Configuration for HD-SDI Output I/O Card 

•  Seven (7) total available dual-rate ports  

•  Two (2) ports configured for HD-SDI video output 

•  Four (4) ports configured for SD-SDI, SDTI or ASI video output 

•  One (1) port software configurable for video monitor port 

HD-SDI / SDI Interface Connector Type 

Type BNC female 

Input / Output Return Loss 

•  SD Ports - >15 dB from 5 MHz to 270 MHz 

•  HD Ports - >15 dB from 5 MHz to 1485 MHz 

Connecting Cable 

•  SD Ports - Belden 8281 or equivalent, 300 meters maximum 

•  HD Ports - Belden 1694A or equivalent, 100 meters maximum 

Forward Error Correction 

Reed-Solomon, T=1 (SONET / SDH payload only) 

Signal Processing 

SDI EDH (Error Detection and Handling) 

Ancillary Data  

Transparent forwarding of 2 AES/EBU audio groups (4 stereo or 8 mono)  

Physical Specifications 
Line Card Configuration 

Single-wide card slot, front and rear, Prisma IP chassis 

Chassis Compatible 

Prisma IP M-Series, C-Series, and Micro Node 

Power 

40 W max. 

Operating Temperature 

0°C to 50°C / 32

°F to 122°F 

(extended operation above 40

° C / 104° F not recommended) 

Storage Temperature 

-40°C to 70°C / -40°F to 158°F 

Relative Humidity 

5% to 85% (non condensing) 

Emissions 

FCC Part 15B and CE 

Safety 

UL, CUL, and TÜV