Cisco Prisma FiberLinX Modules (CWDM) Installationsanleitung
4006062 Rev B
3
Safe Operation for Software Controlling Optical Transmission Equipment
Safe Operation for Software Controlling Optical
Transmission Equipment
Transmission Equipment
If this manual discusses software, the software described is used to monitor or
control our and other vendors’ electrical and optical equipment designed to transmit
video, voice, or data signals. Certain safety precautions should be observed when
operating equipment of this nature.
control our and other vendors’ electrical and optical equipment designed to transmit
video, voice, or data signals. Certain safety precautions should be observed when
operating equipment of this nature.
For equipment specific safety requirements, refer to the appropriate section of the
equipment documentation.
equipment documentation.
For safe operation of this software, refer to the following warnings.
WARNING:
Ensure that all optical connections are complete or terminated before
using this equipment to remotely control a laser device. An optical or laser
device can pose a hazard to remotely located personnel when operated
without their knowledge.
Allow only personnel trained in laser safety to operate this software.
Otherwise, injuries to personnel may occur.
Restrict access of this software to authorized personnel only.
Install this software in equipment that is located in a restricted access area.