Cisco Prisma II 1310 nm HDTx Transmitters Installationsanleitung
Chapter 4 Operation using LCI
76
78-4023013-01 Rev C
Result: The Change Value dialog box appears. This example shows the dialog
box for the Enable Laser parameter.
3 In the Command to box, type the value to use for the limit.
4 Click Execute.
Result: The new value appears in the alarm limit column.
Note: For details on all alarm limits, see
4 Click Execute.
Result: The new value appears in the alarm limit column.
Note: For details on all alarm limits, see
Module Parameter Descriptions (on page