Cisco Cisco Prisma II EDR Receiver Installationsanleitung
3-2
Operation Using the ICIM
78-748704-01 Rev C
ICIM Introduction
Introduction
The ICIM functions as the user interface for the Prisma II application modules, as
well as the interface between the Prisma II modules and the Transmission Networks
Control Systems (TNCS) software. The ICIM allows local module configuration and
status monitoring for up to 82 modules located in multiple chassis. The ICIM
features easy-to-use software that is navigated using the numeric keypad and the
LCD display.
Important:
•
Important:
•
Do not operate any Prisma II Chassis without a fan tray properly installed. If a fan
tray is not installed in the chassis, the ICIM will not communicate with any of the
modules in the chassis.
•
All chassis connected in a “daisy-chain” fashion must be powered and have a fan
tray installed. A chassis that is connected but is either not powered or does not
have a fan tray installed will cause faulty operation of the ICIM.
•
All chassis connected in the daisy-chain must have a unique chassis ID number.
ICIM Block Diagram
The ICIM is illustrated in the block diagram below.